已添加 Custom Acrylic Carabiner
- 8 years of customization experience
- Environmentally friendly materials
- Please Upload PSD/PNG/PDF/AI file. CMYK colour. Need 300 resolution, 1000 pixels or more.transparent background or PSD format
- size should include border(margin) and depends on the longest edge, not only the design size.
-
If your design with semi-transparent part, please separate your design's semi-transparent part from your artwork ,put the opaque part and semi in correspond layer.
- Same design on both sides means that the back side will be mirrored (if you don't want to use the mirror design on the back side, please provide the front and back side and choose the option for a different design on both sides)
-
Different design for double side, please separate the layer.If the colors on the front and back are one shade darker than the other, or if there are prominent colored lines, the pattern on the other side may be visible through the light.that's normal and inevitable.
1、borderless setup
- 0.5-1mm bleeding edge (with color) must be provided.that's for calibration during cutting
- one layer for design ,another layer for cutline （better provide that so our designer will see how it been cut)
2、Gradient setup
- Please separate gradient layer on the design.put the design and gradient separately in the psd.
- Because of printing feature.For light semi colors, when printed that gonna be invisble. To avoid this problem, better make the background color darker,Saturated.
Warm Reminder on transparent background/details :
1. White color can't be a transparent color , please avoid using white for transparency.
2. The transparent color will be printed lighter compared to what it looks like in your files.
3. Keep in mind that any colors that are very light (for example, un-saturated colors) will come out difficult to see or invisible (like nothing is printed)
4. When formatting opacity for your background in the files, we suggest keeping it at 70-100% opacity
A TIP: the transparent color depends on the SATURATION AND THE OPACITY
For Example:
A “light” shade of blue will be difficult to see
A “middle” shade of blue will be visible
A “dark” shade of blue will come out the heavily visible
|
product name |
Acrylic Carabiner(Double Sided Printing) |
| MOQ | 1 pieces |
| Printing | CMYK Printing |
| File requirements |
1. Resolution: 300 DPl or minimum 1000 pixels; Color Mode: CMYK 2. File Formats: JPG, PNG, PSD, JPEG, etc. 3. Full Bleed Printing: Add 1.5mm bleed on all sides. lf no bleed is provided, leave a 1.5mm transparent border For colored semi-transparent effects, use separate layers 4.Cutting Outline: All outer corner radii should be R1.1; Cutting distance between elements ≥ 6mm 5. Decorative Holes: Round holes must be > 3mm in diameter lrregular holes: inner cutout should be 3x3mm-4x4mm,or >7x11mm Corner radius > R1.1mm. Minimum spacing from edge > 2.5mm 6. Hole Placement Tip: lf no bead chain is used, the opening is recommended to be placed at the top area of the design Otherwise, the item may flip upside down when hanging due to gravity
|
| Notice |
There is a protective film on the surface of acrylic keychains(except the epoxy ones). About the size:All the size would have the clear margin included and size will be the longest side (width or height) |
